Fasteners
Our fasteners achieve clean bonds and transfer of force to plastic components by means of light embedding, casting, pressing in or using adhesives.
Fasteners are used, for example, with CFRP and GFRP composites, SMC and BMC components, foam plastics, elastomers and rubbers.
Our fasteners are made from mild steel and are galvanised and passivated, or are available in stainless steel 316/S16 with internal or external threads. They consist of a wide variety of perforated base plates with welded set screws or nuts, of differing lengths and diameters.
Available perforated base plates:
(S = perforated base plate, selectable for F types)
| Designation | Shape | Dimensions |
|---|---|---|
Q15 (SQ15) | square | 15x15mm² |
B20 (S20) | round | Ø 20mm |
B23 (S23) | round | Ø 23mm |
Q32 (SQ32) | square | 32x32mm² |
B38 (S38) | round | Ø 38mm |
T38 (ST38) | rectangular | 38x15mm² |
B50 (S50) | round | Ø 50mm |
Q58 (SQ58) | square | 58x58mm² |
Further types available on request
Fastener types
| Type | Thread sizes | Length (mm) | |
|---|---|---|---|
| Type M1 External thread | M4 | 12 |
|
M5 | 16 | ||
M6 | 20 | ||
M8 | 25 | ||
M10 | 30 | ||
40 | |||
50 | |||
60 |
| Type | Thread sizes | ||
|---|---|---|---|
| Type F1 Internal thread Nut | M3 |
| |
M4 | |||
M5 | |||
M6 | |||
M7 | |||
M8 | |||
M10 |
| Type | Thread sizes | Length (mm) | |
|---|---|---|---|
| Type F2 Internal thread Threaded bushing | M4 | 5 |
|
| M5 | 10 | ||
| M6 | 12 | ||
| M8 | 15 | ||
| M10 | 20 | ||
| 22 | |||
| 25 |
| Cable holder | Description | |
|---|---|---|
| CableTyrap-12 made from 316 stainless steel | Fastener with cable holder 16 (outer) x 12 (inner) mm² base plate 30x30mm² |  |
| CableTyrap-R made from 316 stainless steel | Fastener with cable holder l x w x h: 32x25x8mm³ base plate with holes, approx. 15x32mm² |  |
| CableTyrap-RY made from 316 stainless steel | Fastener with cable holder l x w x h: 32x25x8.5mm³ base plate with round spacers, approx. 15x32mm² |  |
Further types and "pin" fasteners on request